specifications and customer reviews about the model, as well as what to look for when choosing

[ad_1]

one

Blender Red­mond RHB 2944 is a small-sized uni­ver­sal device.

With it, you can auto­mate part of the work in the kitchen and make cook­ing less time-con­sum­ing.

With this appli­ance, you can pre­pare dish­es such as pates, pas­tas, smooth­ies, curd mass, var­i­ous creams and desserts.

Some dish­es can­not be pre­pared at all with­out a blender, which makes it an indis­pens­able assis­tant when work­ing in the kitchen.

Redmond RHB 2944

The design of the device is made in a lacon­ic style. The body of the device (elec­tric motor block), as well as noz­zles for replace­able con­tain­ers and noz­zles are made of white plas­tic. In its upper part there are two con­trol but­tons made of rub­ber­ized gray­ish mate­r­i­al. The but­tons have a soft pres­sure, fin­gers do not slip off them.

The top but­ton is respon­si­ble for turn­ing on the blender, the but­ton below it is respon­si­ble for turn­ing on the “tur­bo” mode. This mode allows you to increase its pow­er to max­i­mum (1300 W). The blender is equipped with over­heat­ing pro­tec­tion, which allows you to extend its ser­vice life and make it safer to use.

The device is pow­ered from a net­work with a volt­age of 220 to 240 Volts, the pow­er cord is non-remov­able, it does not have twist pro­tec­tion. Blender noz­zles are made of stain­less steel, replace­able con­tain­ers are made of trans­par­ent hard plas­tic. Coun­try of ori­gin — Chi­na.

2

Device features

Blender Red­mond RHB 2944 per­forms the func­tions of three devices in one:

  1. Blender (immer­sion type) — allows you to extreme­ly fine­ly grind prod­ucts, while mix­ing them. A small S‑shaped knife is built into the base of the blend­ing attach­ment, which rotates at high speed to quick­ly turn the ingre­di­ents into a homo­ge­neous mass. It is used for prod­ucts with a soft con­sis­ten­cy, such as cot­tage cheese, boiled pota­toes, minced meat, giv­ing them a spe­cial taste.
  2. mini mix­er — Using the whisk attach­ment, you can beat egg whites, dough for var­i­ous pas­tries, and make var­i­ous drinks. At the same time, the design is lighter com­pared to a con­ven­tion­al mix­er, which facil­i­tates the cook­ing process.
  3. chop­per — unlike a blender, it allows you to cut more sol­id foods. On aver­age, the size of the cut is com­pa­ra­ble to a coarse grater, it can be adjust­ed by the dura­tion of grind­ing. The blade of the chop­ping attach­ment, like the blender attach­ment, has the shape of the let­ter S, but with a larg­er diam­e­ter. You can grind: nuts, herbs, veg­eta­bles, meat, cheese.

Specifications

Char­ac­ter­is­tic Options
Volt­age 220–240 V, 50 Hz
Rat­ed pow­er 800 W
Max pow­er 1300 W
engine’s type direct cur­rent
Elec­tric shock pro­tec­tion class II
over­heat pro­tec­tion there is
blender attach­ment there is
whisk attach­ment there is
Chop­per bowl vol­ume with lid 500 ml
Mix­ing glass vol­ume 600 ml
Main mode speed 14,500 rpm, 15% error
Tur­bo speed 16,000 rpm, error 15%
Dimen­sions 400×63×63mm
Net weight (com­plete set) 1.3 kg
Pow­er cord length 1m
Guar­an­tee peri­od two years
Device for indus­tri­al use (accord­ing to war­ran­ty con­di­tions) No

Advantages and disadvantages

pros

  • Light weight
  • com­pact­ness
  • Over­heat­ing and over­load pro­tec­tion
  • The pres­ence of two modes of oper­a­tion

Minus­es

  • The pow­er cord is non-remov­able, there is no pro­tec­tion against twist­ing
  • Small vol­ume bowls for mix­ing and grind­ing
  • The device has only one whisk for whip­ping

Bot­tom line: the short­com­ings will not be crit­i­cal for those who are used to cook­ing in small por­tions. How­ev­er, they are com­pen­sat­ed by the low weight and com­pact­ness of the device.

Model configuration

The Red­mond RHB-2944 device pack­age includes the fol­low­ing:

  1. Elec­tric motor block — 1 pc.
  2. S‑shaped knife — 1 pc.
  3. Noz­zle-blender — 1 pc.
  4. Adapter for whisk attach­ment — 1 pc.
  5. Whisk attach­ment — 1 pc.
  6. Chop­per bowl with lid — 1 pc.
  7. Mix­ing glass — 1 pc.
  8. Oper­a­tion man­u­al — 1 pc.
  9. Ser­vice book — 1 pc.

one

Instructions for use

As a blender

  1. Attach the blender attach­ment to the motor unit.
  2. Place ingre­di­ents in a mix­ing glass.
  3. Plug in the appli­ance.
  4. Dip the blender into the food bowl and hold down the pow­er but­ton.
  5. Process prod­ucts to the desired con­sis­ten­cy, if nec­es­sary, switch to tur­bo mode by press­ing and hold­ing the appro­pri­ate but­ton. Rec­om­mend­ed non-stop run­ning time under load: 1–2 min­utes.
  6. At the end of work, turn off the device from the net­work, dis­con­nect the noz­zle for sub­se­quent wash­ing.

As a mixer

  1. First, attach the whisk adapter to the motor unit, then attach the whisk there.
  2. Place the ingre­di­ents in a mix­ing glass.
  3. Plug in the appli­ance.
  4. Dip the whisk into the bowl with the ingre­di­ents and hold down the pow­er but­ton.
  5. Beat the prod­ucts to the desired con­sis­ten­cy, if nec­es­sary, switch to tur­bo mode by press­ing and hold­ing the appro­pri­ate but­ton. Rec­om­mend­ed non-stop run­ning time under load: 30 sec­onds.
  6. At the end of work, turn off the device from the net­work, dis­con­nect the noz­zle for sub­se­quent wash­ing.

As a grinder

  1. Attach the blade attach­ment to the cen­ter of the chop­ping bowl.
  2. Place the ingre­di­ents in a bowl.
  3. Close the bowl with a lid. Con­nect the block with the elec­tric motor.
  4. Plug in the appli­ance
  5. Grind prod­ucts to the required con­sis­ten­cy, if nec­es­sary, switch to tur­bo mode by press­ing and hold­ing the appro­pri­ate but­ton. Rec­om­mend­ed non-stop run­ning time under load: 1–2 min­utes.
  6. At the end of work, turn off the device from the net­work, dis­con­nect the noz­zle for sub­se­quent wash­ing.

If the device itself stops work­ing, then the over­heat­ing pro­tec­tion has tripped. Wait 10 min­utes before switch­ing on again.

When clean­ing the device, avoid aggres­sive and abra­sive prod­ucts.

four

Rules for safe handling of the device

  • Wash under run­ning water and immerse in water only remov­able noz­zles and bowls. Do not immerse the unit with an elec­tric motor in water and wash it under run­ning water!
  • Do not allow chil­dren and per­sons with­out the nec­es­sary skills to use the elec­tri­cal appli­ance.
  • Do not use the device in case of mal­func­tions or dam­age. Repairs must be car­ried out by spe­cial­ists of the ser­vice cen­ter.

What to look for when buying?

To avoid unpleas­ant sit­u­a­tions and min­i­mize the like­li­hood of buy­ing a low-qual­i­ty blender, you need to:

  • When pur­chas­ing a blender, you should pay atten­tion to the com­plete­ness, con­di­tion of the com­po­nents and pack­ag­ing.
  • Ask the sell­er to demon­strate the per­for­mance of the device you are buy­ing. If you buy a blender online, check the prod­uct at the point of issue of orders or with the couri­er.
  • If you sus­pect a fake prod­uct, ask the store for doc­u­ments con­firm­ing the authen­tic­i­ty of the prod­uct.

5


Опубликовано

в

от

Комментарии

Добавить комментарий