A separate room for storing clothes is gradually ceasing to be an attribute of luxury and the prerogative of a large private house. So, for example, in a city apartment, you can organize a small dressing room from the pantry — this will save space in other rooms, it will cost less than a custom-made wardrobe and allow you to organize convenient storage of things. In this article, we will tell you how to make it yourself step by step.

How to make a dressing room out of a pantry

Requirements
Configuration
— Construction type
— Location
— Doorway
How to do it yourself
— Planning
— Space preparation
– Lighting
— Construction assembly
— Mounting

What to Consider

If you decide to remake a dressing room from a pantry in Khrushchev or any typical apartment, it is important to consider a few points.

  • Dimensions. The recommended minimum is 1 by 1.5 meters. The width should be from 1.2 meters if the storage is located along one wall. For an L- or U-shaped layout, you will need a space of at least 1.5 by 1.5 meters. If you want to change clothes right there, there should be at least 90 cm of free space between the shelves.
  • What will be stored. This needs to be decided at the planning stage. The whole configuration will depend on the volume and type of things. For outerwear, suitcases and shoe boxes, you will need special storage systems.
  • Ventilation. Since the pantry is a closed isolated space, it is necessary to make a forced ventilation system in it (at least a minimal one — a fan). This will help to avoid mustiness, and the clothes will not become damp over time.

  • Wardrobe: types, filling ideas and 70 beautiful photos

    Storage systems

    Wardrobe: types, filling ideas and 70 beautiful photos

Configuration

Type of wardrobe system

There are several types of clothing storage systems.

  • Cabinet-made, as a rule, to order by furniture makers, or you can assemble it yourself. From the pros: the design turns out to be reliable, it is assembled exactly to the size, the internal content can be organized the way you need it. Of the minuses: bulky design, high price and static.
  • Frame — a lightweight version of the hull configuration. In this case, metal supports are installed along the vertical axis, which are attached to the floor and ceiling, and shelves and other structural elements are located on them. Due to the absence of side walls, this design does not visually clutter up the room, it is easy to mount it yourself and you can make changes to the content at any time.
  • Mesh — is a modular rack, where all shelves, drawers and baskets are made of lightweight mesh material. Like the frame, it is mobile and easy to install. The mesh base will not withstand a lot of weight, so in such a system it will not be possible to store heavy and voluminous things.

  • How to make your own dressing room: tips for placement, planning and assembly

    Wardrobe

    How to make your own dressing room: tips for placement, planning and assembly

Location

By location, wardrobe systems are divided into several types.

  • Linear — all storage is located along one wall, as a rule, opposite the pantry door. Visually, such a wardrobe resembles an ordinary spacious wardrobe. This option is suitable for narrow rooms of a small area.
  • L-shaped — this type of arrangement is suitable for long rooms. The storage system is located on two adjacent walls. Most often, the longer part is taken away for clothes, and the second — for bulky items (vacuum cleaner, suitcases) or shoes.
  • U-shaped — if the area of ​​\u200b\u200bthe pantry allows, the racks can be placed along three walls. To implement such a layout, an area of ​​\u200b\u200bat least 3 squares is needed. In such a wardrobe, it will be possible to store any things: from everyday to outerwear, as well as all kinds of bags, sports equipment, bedding, etc. It is better to place hangers on the long side, since it is more convenient to remove clothes from hangers directly.

Doorway

If the pantry is located in the hallway, the dressing room must be closed. In this case, it makes sense to choose an ordinary interior door with a handle. And on the reverse side you can hang a full-length mirror.

If the room adjoins the room, sliding doors will look beautiful: wooden, glass or louvered type. Or the doorway can be left empty — the open type will visually increase the space, since the place for storing clothes will not be perceived as a separate room.

  • 7 essential items from IKEA for a small dressing area

    Wardrobe

    7 essential items from IKEA for a small dressing area

materials

When choosing materials for finishing the room and for the wardrobe system itself, be guided by the following rules.

  • This space is primarily functional. Almost all surfaces will be covered with shelves, hangers and clothing itself, so visually the finish can be simple. There is no point in a complex design — beautiful patterns on the wallpaper or original plaster simply will not be visible behind things.
  • The necessary characteristics for finishing materials: reliability, strength, moisture resistance. The latter is important, because sometimes damp, under-dried things can end up in the wardrobe, and this, in turn, will provoke a musty smell and, in the worst case, the appearance of mold. Moisture-resistant paint, plaster, as well as non-woven, vinyl wallpaper or fiberglass will do.
  • All surfaces of the former pantry should be easy to clean or wash. It is best to lay tiles or porcelain stoneware on the floor, a laminate is also suitable, but it is better to refuse carpet.
  • The same goes for the material of the structure itself. It must be strong, durable, not be afraid of mechanical stress and moisture. The most popular materials are MDF, chipboard and chipboard, as well as metal for frame systems. If the body is planned to be made of wood, it should be covered with a protective varnish on top.

How to make a dressing room from the pantry with your own hands

If you want to equip a small dressing room instead of a pantry in Khrushchev, Stalin or a new building, use this step-by-step plan. It is universal and suitable for any type of apartment.

Planning

A project starts with a plan. At this stage, you need to decide what things and in what quantity you will store in a separate room. A wardrobe can be both a full-fledged replacement for a wardrobe, and an additional storage system — for example, for seasonal or ceremonial clothes.

Next, we divide the space vertically and plan 3 mandatory zones: lower, upper and middle.

The middle one is the main one — it will contain hangers, shelves, baskets, containers for things that you use most often. The optimal location is at a height of 60-190 cm. This will allow you to easily reach any thing. In the upper zone there are «mezzanines» — high shelves or closed cabinets for things that are rarely used and that do not need to be taken out every day. At the bottom there is a place for shoes, boxes with bed linen and, if necessary, various little things.

  • 5 perfect wardrobes from famous movies

    Wardrobe

    5 perfect wardrobes from famous movies

Space preparation

When the project of the pantry-dressing room is ready, the room is freed from all things and old finishes. The walls are cleaned, if necessary, primed and leveled. After that, lay the flooring, paint the walls or paste them with wallpaper. If necessary, paint the ceiling. Also, the preparatory stage includes the laying of ventilation and electrics, but before finishing.

Lighting

There are no windows in the utility rooms, so it is important to plan the lighting system so that all things are clearly visible and can be found quickly. The best option is LED-lights on the ceiling and local illumination of different areas: shelves, baskets, hangers. For this purpose, LED strips, overhead or recessed lamps that are built directly into the furniture body are suitable. These options are good because you do not need to ditch the walls to install them. For overhead light, choose bulbs that will not heat up — this is important for the fire safety of the room.

If a mirror is planned in the wardrobe, think over its illumination in advance: it should be sufficiently lit, and the temperature of the light should not distort the perception of colors.

Construction assembly

After the room has been prepared, we proceed to the main stage — the creation of the storage system itself. To do this, you need to draw drawings of all its components and make them — with your own hands or order in a workshop, buy modular systems in the mass market.

Mounting

When all parts of the structure are ready, they can be installed in the future dressing room. Installation depends on the type of construction: cabinet furniture is attached to the walls, floor and ceiling, metal frames — only in the upper and lower horizontals. Then we proceed to the filling: we attach shelves, drawers, hanger bars and other necessary elements to the frames or walls of the hull base.

We fill the design with things, and a small but full-fledged separate wardrobe is ready!

  • 6 options for arranging a wardrobe in a small apartment

    Wardrobe

    6 options for arranging a wardrobe in a small apartment

DIY



Оставьте комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *