6 best construction cars

The size of the construction site is often large, the unloading area and the place of use of materials are far from each other. Their transfer takes a lot of time and effort. To speed up the process, special equipment is used – a construction wheelbarrow. It reduces the burden on workers and allows you to transport more volume at a time.

Unlike garden models, construction models are designed for large loads. They have increased load capacity and capacity. In addition to transporting bulk and solid building materials, wheelbarrows are also used to transport soil and construction debris after completion of work.

How to choose a construction wheelbarrow

The equipment is used repeatedly for a long time, storage and operation is carried out in aggressive conditions, so reliability is an important selection criterion. In addition, the inventory should be easy to use in order to facilitate the work of workers.

The design of all wheelbarrows is based on: a trough for loading, a metal frame with a handle, wheels for transportation. At the same time, the models differ from each other in various ways. When comparing different options, pay attention to the parameters below.

load capacity

The speed depends on the amount of materials loaded into the tray. Ordinary construction wheelbarrows are able to withstand the transportation of goods weighing up to 200 kg, reinforced – up to 320 kg. The latter have a reinforced structure, withstand a large load, due to which the transportation process takes less time.

Do not overload the equipment beyond the norm specified in the characteristics, otherwise it may break. In this case, it is necessary to take into account the physical abilities of the person who will carry out the transportation. Sometimes it’s easier to do multiple “raids” with less effort.

Volume

This parameter reflects the amount of bulk ingredients (sand, gravel, crushed stone, etc.) that are placed in the body. The capacity of the trough is calculated in liters, but is an inaccurate indicator. After all, bulk materials can be loaded “with a slide.” In addition, it is difficult to determine the amount of oversized cargo and construction waste that can fit in a trough.

wheels

The landscape of a construction site is often uneven, so sometimes increased maneuverability is required to transport materials. Single wheel carts are convenient for transporting goods over narrow paths and bumps. Two-wheeled models have less traffic, but they are easier to manage, since the load is distributed evenly.

The diameter and type of tires also play an important role. The larger the wheel size, the easier and more convenient it is to work with a wheelbarrow. By type, pneumatic (with or without chambers) and cast wheels are distinguished. For the transport of materials on a soft surface, the first type is better suited. They smooth vibration well, do not make noise. Cast wheels are heavier and stiffer, but they won’t puncture and don’t require pumping.

Body

The trough of construction wheelbarrows has an elongated trapezoidal shape. The sloping front makes it easy to unload bulk materials.

Unlike garden models, the trough of construction wheelbarrows is made only of steel. Sheet thickness – from 0.8 to 3 mm. This allows you to carry more materials. To increase resistance to impacts and heavy loads, the body has additional stiffening ribs. Such a body is not deformed even under the maximum allowable loads.

To withstand environmental conditions, the metal is galvanized or coated with enamel paint. The paint protects the body from mechanical damage as a result of shocks and collisions, zinc oxide – from corrosion.

handles

The convenience of driving a wheelbarrow depends on the type of handles installed on the model. On one-wheeled cars, 2 parallel handles are installed, on two-wheeled ones – usually one transverse, but there are models with two. Longitudinal handles are convenient to maneuver and tilt the trolley when unloading. When using the cross handle, you can drag the cart behind you. This is convenient if it is difficult to push the trolley in front.

External coating

The inventory used at the construction site is exposed to aggressive environmental influences. The durability of the equipment depends on the ability of the materials to withstand the processes of oxidation and mechanical destruction. The enamel coating protects the metal from damage and corrosion, but wears off over time. Galvanized metals withstand the negative effects of the environment longer.

inventory design

It implies the design features of the frame, the weight of the wheelbarrow (preferably within 20-30 kg), the presence of supports and stiffeners. Frames of construction wheelbarrows are made of thick-walled metal pipes.

Equipment dimensions

Construction cars are needed in production or construction. You need to know the overall dimensions of the wheelbarrow in order to be sure that it will pass through a doorway or other building structures, and be able to move along a narrow path.

Best Reinforced Construction Wheelbarrow

Garden construction two-wheel model THORNE It is applied to transportation of building and agricultural materials. The outer coating of the frame is powder enamel. Existence of an emphasis facilitates unloading of loose materials. A quality model includes a steel tube frame, the original arrangement of which takes into account the peculiarities of the use of the equipment.

A trough made of galvanized steel with rolled sides increases strength and wear resistance, protects the operator from injury. Thanks to the body supports, a high load capacity is ensured. The kit includes a pneumatic wheel with a chamber and ball bearings. This simplifies the transport of materials on soft ground or hard surface.

Characteristics

• Load capacity 320 kg.
• The volume of the trough is 100 liters.
• Number and diameter of wheels 2×390 mm.
• Wheel type: pneumatic.
• Frame material: enameled metal.
• Trough material: galvanized metal.

pros

• large load capacity;
• high strength.

Minuses

• low corrosion resistance;
• rapid tire wear;
• low quality plastic braid on the handle.

The best two-wheeled construction wheelbarrow

Construction wheelbarrow GIGANT with two wheels has high stability, does not roll. The body is securely attached to the frame and support with 5 bolts. The high support makes the loading process convenient. The light weight makes the equipment easy to handle. High-quality rubber coating of the handles prevents slipping, does not rub fingers.

The 100-liter body is reinforced with 2 props from the front. The tubular frame does not warp or creak even when fully loaded. Easy-to-maintain chamber pneumatic wheels are equipped with wear-resistant bearings. The steel frame covered with powder enamel is not affected by the environment.

Characteristics

• Load capacity 200 kg.
• The volume of the trough is 100 liters.
• Number and diameter of wheels 2×360 mm.
• Wheel type: pneumatic.
• Frame material: enameled metal.
• Trough material: galvanized metal.

pros

• stability;
• convenient control with 1 hand;
• reliability;
• lightness of construction.

Minuses

• obstruction along narrow paths;
• overturning when hit in a hole.

The best one-wheel construction wheelbarrow

Wheelbarrow construction unicycle PENNANT used to transport soil, fertilizers, construction debris and other materials. The support in front of the wheel makes unloading the contents more convenient and protects the wheel from mechanical influences, but clings to bumps.

The strong metal frame maintains big loadings. An additional transverse bar securely fixes the trough. It does not flex or warp when fully loaded. Thanks to the one-wheel design, increased cross-country ability is provided.

When the bucket is fully loaded, the operator is under a heavy load. Rubberized handles provide a secure grip, but you will have to operate with two hands.

Characteristics

• Load capacity 200 kg.
• The volume of the trough is 110 liters.
• Number and diameter of wheels 1×400 mm.
• Wheel type: pneumatic.
• Frame material: enameled metal.
• Trough material: galvanized metal.

pros

• increased maneuverability and maneuverability;
• easy assembly.

Minuses

• control with only two hands;
• high load on the operator.

Best galvanized construction wheelbarrow

One-wheel galvanized model KROK used to move building materials, debris, or other bulk or bulk cargo. The collapsible frame makes it easy to transport the unit. Lightweight design ensures easy handling. The bucket made of thin galvanized metal quickly deforms when fully loaded.

Thanks to the rubber chamber wheel (diameter 400 mm) on bearings, the device smooths out surface irregularities and dampens vibration. Due to the lack of plastic lining on the stops, the paint wears off over time, rust appears.

Characteristics

• Load capacity 200 kg.
• The volume of the trough is 110 liters.
• Number and diameter of wheels 1×400 mm.
• Wheel type: pneumatic.
• Frame material: galvanized metal.
• Trough material: galvanized metal.

pros

• ease;
• compactness.

Minuses

• small thickness of the trough sheet;
• lack of overlays on stops.

The best tubeless construction wheelbarrow

Comfortable construction wheelbarrow BELAMOS reduces the load on the back of the operator. Cast polyurethane wheels withstand temperatures from -50 to +50 ⁰C. Wheel diameter of 380 mm provides cross-country ability and maneuverability in swampy and sandy areas. A steel tube with a diameter of 28 mm ensures the high strength of the frame.

The original design of the subframe protects the trough from deformation, prolongs the service life of the product. Increased load capacity allows you to carry out any extreme work on construction sites. A fully loaded wheelbarrow can only be driven by two people.

Characteristics

• Load capacity 230 kg.
• The volume of the trough is 110 liters.
• Number and diameter of wheels 2×380 mm.
• Wheel type: pneumatic.
• Frame material: enameled metal.
• Trough material: galvanized metal.

pros

• wear-resistant wheels that do not require pumping;
• high load capacity.

Minuses

• big weight;
• high cost.

The best cheap construction wheelbarrow

Inexpensive one-wheeled wheelbarrow Zubr Designed for use in a country house, cottage or construction site. Simple and easy to use. Plastic pads on the handles prevent slipping of the palms. Thin material is deformed when the trough is fully loaded.

The special design of the frame protects the wheel from impacts, but catches on bumps. The model has high maneuverability. Quality bearings ensure a long service life. The kit includes a complete set of fasteners.

Characteristics

• Load capacity 200 kg.
• The volume of the trough is 110 liters.
• Number and diameter of wheels 1×400 mm.
• Wheel type: pneumatic.
• Frame material: enameled metal.
• Case material: galvanized metal.

pros

• cheapness;
• wheel protection.

Minuses

• the grips on the handles quickly begin to rotate.

Construction cars are used not only in the construction of large buildings, but also for the construction of small structures in private areas. Transportation of bulk materials is greatly facilitated by the use of special equipment. A wheelbarrow is a convenient and unpretentious inventory that, with proper operation and timely maintenance, will last for many years.

When choosing a wheelbarrow, it is necessary to take into account what cargo and on what surface will be transported. This defines the parameters of the equipment. Study the above recommendations, the advantages and disadvantages of these varieties and feel free to buy the chosen model.