Do-it-yourself installation of a refrigerator in the kitchen: overall, built-in. Video.

[ad_1]

Many own­ers are accus­tomed to mount­ing house­hold appli­ances on their own and con­nect­ing it to the elec­tri­cal net­work, believ­ing that there is noth­ing com­pli­cat­ed in this mat­ter. Although in prac­tice it turns out that not every­one is able to ensure the per­fect oper­a­tion of the device. To under­stand the nuances of installing a refrig­er­a­tor in the kitchen, you should read the instruc­tions and some use­ful tips that can make your job eas­i­er.

Accom­mo­da­tion type selec­tion

When start­ing to install a refrig­er­a­tor in the kitchen, you should think over all the nuances asso­ci­at­ed with this work in advance. First of all, first you need to decide which type of place­ment will be cho­sen — a lin­ear or angu­lar option:

  1. lin­ear arrange­ment ide­al when the kitchen space is spa­cious enough. In such a room, you can install in one line all the nec­es­sary house­hold appli­ances, as well as a kitchen set. Instal­la­tion of inte­ri­or items and tech­ni­cal devices is car­ried out along the wall. The refrig­er­a­tor in this case can be installed any­where in such a straight line.
  2. cor­ner arrange­ment it is prefer­able to choose when the kitchen is small. As a rule, a sep­a­rate­ly locat­ed refrig­er­a­tor is used for this, installed at the entrance to the room — close to the sink. How­ev­er, you will have to take into account the nuance that there must be a cer­tain dis­tance between the zones with house­hold appli­ances and the sink.

Refrigerator in the kitchen

For any of the above loca­tion options, cer­tain rules must be fol­lowed. First of all, after deliv­er­ing a new refrig­er­a­tor to the room, it needs to be unpacked. To do this, remove all pro­tec­tive ele­ments from the sur­face of the prod­uct, remove the unit from the pal­let, and then trans­fer it to the instal­la­tion site.

Where to install the refrigerator?

Before installing a refrig­er­a­tor, it should be borne in mind that the min­i­mum kitchen area suit­able for this must be more than 5 m2and the ceil­ing is locat­ed no low­er than at a two-meter height.

The refrig­er­a­tor should not be mount­ed near heat­ing appli­ances and stoves — this can lead to its over­heat­ing and its fail­ure. The com­pres­sor, which pro­vides cool­ing of the prod­ucts inside the unit, needs good ven­ti­la­tion..

It is not rec­om­mend­ed to place the prod­uct near a win­dow, since the sun’s rays sig­nif­i­cant­ly increase the heat­ing of the cool­ing grate, forc­ing the unit to work con­tin­u­ous­ly.

Also, addi­tion­al heat­ing leads to dam­age to the paint­work and the grad­ual destruc­tion of the skin.

Power supply

Par­tic­u­lar atten­tion should be paid to the issue of pow­er sup­ply of the device. Some­times own­ers con­nect equip­ment to decrepit exten­sion cords with thin wires. More­over, such “car­ri­ers” often simul­ta­ne­ous­ly pow­er sev­er­al appli­ances, includ­ing a microwave oven and an elec­tric ket­tle.

This is absolute­ly unac­cept­able, because it is sim­ply dan­ger­ous.. It is required to pro­vide the refrig­er­a­tor with a mod­ern sock­et equipped with ground­ing. It is advis­able to put a sta­bi­liz­er between the out­let and the refrig­er­a­tor, espe­cial­ly when the volt­age in the house is unsta­ble.

Use­ful relat­ed arti­cles:

Structural stability

Accord­ing to the instruc­tions that come with each refrig­er­a­tor, it only needs to be installed on a flat floor. The prod­uct must not be able to wob­ble. To improve sta­bil­i­ty, it is nec­es­sary to cor­rect­ly adjust the legs of the unit.

Refrigerator design stability

Cor­rect instal­la­tion should ensure that the upper sur­face of the refrig­er­a­tor is hor­i­zon­tal and its side plane is ver­ti­cal. To adjust these para­me­ters, all prod­ucts have height-adjustable legs.

Impor­tant! You can not lean the refrig­er­a­tor against the wall, it is required to pro­vide a small (5 cm) gap. It will help cir­cu­late air, con­tribut­ing to bet­ter cool­ing of the unit, which con­stant­ly gen­er­ates heat dur­ing oper­a­tion.

Make sure your refrig­er­a­tor is com­fort­able to use by installing it so that the door opens com­fort­ably. Tra­di­tion­al­ly, all mod­els are pro­duced with doors open­ing from left to right. When a dif­fer­ent open­ing option is need­ed, you should imme­di­ate­ly pur­chase a device adapt­ed to rehang the door.

How to install a built-in refrig­er­a­tor?

The method of mount­ing a built-in refrig­er­a­tor in most cas­es depends on its dimen­sions. Based on taste pref­er­ences, it is bet­ter to choose a mod­el that is eas­i­ly hid­den under a fur­ni­ture set. An equal­ly pop­u­lar option is a refrig­er­a­tor with an open con­trol pan­el. The sec­ond solu­tion is more prof­itable, since the pan­el makes it pos­si­ble to change the oper­at­ing para­me­ters of the unit with­out open­ing the door of the refrig­er­at­ing cham­ber.

The refrig­er­a­tor doors must be attached to the rails on the front of the kitchen fur­ni­ture. Then, when you open the cab­i­net, the refrig­er­a­tor door will open, as if slid­ing along the facade. The open­ing of the refrig­er­a­tor itself is lim­it­ed by the open­ing angle of the facade hinge. They should be adjust­ed in advance, because lat­er the refrig­er­a­tor will not allow you to do this.

Built-in refrigerator installation

The unit itself is screwed to the cab­i­net with fas­ten­ers locat­ed above and below, as well as on the side. Due to the pres­ence of a groove in the mount­ing brack­ets, you can slight­ly change the posi­tion of the refrig­er­a­tor rel­a­tive to the cab­i­net walls.

Impor­tant! Good air cir­cu­la­tion is required for the com­pres­sor to func­tion prop­er­ly. You can not muf­fle the walls of the head­set; instead of the back sur­face, you need to install a grill spe­cial­ly designed for the built-in refrig­er­a­tor.

If you decide to mount a built-in refrig­er­a­tor in the exist­ing set, con­sid­er not only its dimen­sions, but also all the dimen­sions of the exist­ing doors. They must match the doors of the head­set.

The total cost of the built-in unit will turn out to be high­er than usu­al, how­ev­er, the com­pact­ness of the kitchen, which is obtained as a result, com­pen­sates for all costs.

Video installation of the built-in refrigerator

A detailed visu­al instruc­tion for installing a built-in refrig­er­a­tor is best demon­strat­ed by this video. Even an inex­pe­ri­enced home­own­er will be able to inde­pen­dent­ly install the unit in a kitchen cab­i­net, care­ful­ly review­ing the step-by-step rec­om­men­da­tions of a spe­cial­ist:

https://www.youtube.com/watch?v=nZU3FZcXqvQ

To install a refrig­er­a­tor in the kitchen, and also not to use up too much space, built-in mod­els are cho­sen a lot. If you install them cor­rect­ly, then there will be no dif­fi­cul­ties in oper­a­tion. If space allows, you can place an over­all refrig­er­a­tor in the kitchen, choos­ing the right type of place­ment, as well as guar­an­tee­ing com­plete sta­bil­i­ty.


Опубликовано

в

от

Комментарии

Добавить комментарий