specifications, features and customer reviews, as well as what to look for when choosing

[ad_1]

one

The blender from the Russ­ian man­u­fac­tur­er Red­mond brand RHB-2952 is able to replace three kitchen appli­ances at once: a blender, a whisk and a knife.

The device is equipped with a con­ve­nient sys­tem for smooth­ly switch­ing speed from min­i­mum mode to tur­bo mode.

It is avail­able in work not only for pro­fes­sion­al chefs, but also for novice house­wives.

It does not require spe­cial care, it is easy to dis­as­sem­ble and clean not only by hand, but also in the dish­wash­er.

Dou­ble pro­tec­tion against over­heat­ing and over­load in the mains will help extend the life of the device.

Model Redmond RHB-2952

Parts are pro­duced by a domes­tic man­u­fac­tur­er, but assem­bly is car­ried out in Chi­na. The pack­ag­ing says made in Chi­na. The blender is deliv­ered in a small pack­age of red and black col­ors, with the image of the device itself and its char­ac­ter­is­tics.

Prod­uct col­or is white. On the main body, the buy­er will see two but­tons: tur­bo mode and turn on. On top of the device of the elec­tric unit is a con­ve­nient tog­gle switch for smooth switch­ing of speeds. The pow­er cord has a con­ve­nient hole in the plas­tic-rub­ber mate­r­i­al, which will allow you to store the blender in a sus­pend­ed state, out of the reach of chil­dren.

one

Device Features

The select­ed mod­el is for:

  • grind­ing — allows you to fine­ly chop and mix any veg­eta­bles and fruits, meat, nuts, etc. Ide­al for prepar­ing sal­ad prod­ucts, pie fill­ings, cut­ting meat of any kind.
  • Whip­ping — mix­es and whips liq­uid prod­ucts until smooth: pro­teins and yolks — into a homo­ge­neous lush mass to dec­o­rate pas­tries, cream, creams — cre­ates a more airy foam, eggs — for a per­fect omelet. Cre­ates a del­i­cate tex­ture of the prod­uct.
  • mix­ing – crush­es and mix­es prod­ucts to a homo­ge­neous puree state. Prepa­ra­tion of soup — mashed pota­toes, pea puree-por­ridge, sauces with gar­lic, herbs and oth­er fillers. Fruit smooth­ies.

Specifications

Char­ac­ter­is­tic Options
Col­or White
Pow­er 800–1200W
Type of Man­u­al
Speed ​​con­trol Tog­gle switch (7500–11500 rpm)
Food Net
Tur­bo 14000 rpm
Hous­ing mate­r­i­al Plas­tic
work­space mate­r­i­al Met­al
Elec­tric cord length 1m
Over­load pro­tec­tion there is
over­heat pro­tec­tion there is

Advantages and disadvantages

pros

  • The prod­uct is easy to assem­ble and clean.
  • Quick­ly and effi­cient­ly per­forms cut­ting and grind­ing of almost any prod­uct.
  • When whip­ping, it achieves an airy and del­i­cate con­sis­ten­cy of liq­uid prod­ucts in a minute.

Minus­es

  • Short cord 1 m.
  • The need to con­tin­u­ous­ly press the pow­er but­ton for the device to work.

Model configuration

RHB-2952 includes:

  • blender noz­zle;
  • whisk noz­zle;
  • a glass for whip­ping — 0.5 l .;
  • bowl for grind­ing with a lid — 0.6 l.;
  • chop­ping knife;
  • elec­tric block;
  • elec­tric cord — 1 m;
  • instruc­tions for use;
  • war­ran­ty card.

2

Detailed instructions for use

Before using the equip­ment direct­ly, read the instruc­tions for use from the man­u­fac­tur­er.:

  • Unpack. Care­ful­ly remove the prod­ucts from the box and remove the cel­lo­phane pack­ag­ing. Keep addi­tion­al stick­ers and index­es of the per­son­al num­ber on the case.
  • Pre­pare for use. After stor­age and trans­porta­tion, at a neg­a­tive tem­per­a­ture, it is nec­es­sary to wait a cou­ple of hours before use. Wipe the upper part of the device, rinse the work­ing area with deter­gent under run­ning water. After wash­ing, wipe with a clean cloth. Dry well before use to avoid short cir­cuits.
  • Fix the select­ed noz­zle accord­ing to the dia­gram in the instruc­tions.
  • Get to work.

The dura­tion of the blender with­out inter­rup­tion should not exceed 5 min­utes.

Every 3–4 min­utes, the man­u­fac­tur­er rec­om­mends tak­ing a break of at least 2 min­utes. When using the grind­ing bowl, the dura­tion of the tur­bo oper­a­tion should be short 3–5 sec­onds with breaks for the same time. This will help you bet­ter con­trol the grind­ing process.

After com­ple­tion of work, the device must be imme­di­ate­ly dis­con­nect­ed from the net­work.. Dis­as­sem­ble blender. Rinse and dry with a kitchen tow­el.

In case of a sud­den shut­down dur­ing oper­a­tion, allow the device to cool down for 30 min­utes, and it will be ready for use again.

It is for­bid­den to use chem­i­cal­ly aggres­sive sub­stances to clean the prod­uct. Spe­cial care must be tak­en when clean­ing sharp objects such as knives and blades to avoid cuts.

It is not rec­om­mend­ed to store the prod­uct in the open sun. Avoid get­ting mois­ture on the device.

When work­ing with Red­mond RHB-2952 is pro­hib­it­ed:

  1. Install the chop­per bowl on a soft sur­face to avoid insta­bil­i­ty of the machine dur­ing oper­a­tion.
  2. Twist, break or heat the elec­tri­cal cord dur­ing use.
  3. Unplug the cord from the mains when fin­ished. Do not dis­as­sem­ble the blender con­nect­ed to elec­tric­i­ty.
  4. Dur­ing oper­a­tion, do not touch the mov­ing parts of the prod­uct in order to avoid an acci­dent.
  5. Immerse the blender main body in water.
  6. Use the device by chil­dren under 12 years of age, or per­sons with low phys­i­cal, men­tal and men­tal abil­i­ties, in the absence of a super­vis­ing per­son respon­si­ble for their safe­ty
  7. Immerse in the processed prod­ucts the place of attach­ment of the noz­zle and the elec­tric unit.
  8. Grind sol­id foods: cof­fee, any cere­als and cocoa beans, etc.
  9. Con­tin­u­ous­ly oper­ate the device for more than 5 min­utes with­out inter­rup­tion.
  10. Attempt to repair the device your­self.
  11. Make any changes to the design of the device.

Pos­si­ble mal­func­tions:

  • The device is not work­ing. If there is no volt­age in the elec­tri­cal out­let, you must con­nect the blender to a work­ing elec­tri­cal out­let.
  • Dur­ing oper­a­tion, a strong vibra­tion is felt. The food is cut very coarse­ly — it is nec­es­sary to cut the food more fine­ly.
  • There is a for­eign smell or the engine has stopped dur­ing oper­a­tion. The device has over­heat­ed — you need to wait half an hour for it to cool down.

If the sug­gest­ed rec­om­men­da­tions do not help, then you need to con­tact the war­ran­ty ser­vice cen­ter with a request to repair or replace the prod­uct..

In case of fail­ure of the ser­vice cen­ter in the ser­vice. It is rec­om­mend­ed to replace the blender to avoid injury.

It is for­bid­den to use the blender if there are any exter­nal and inter­nal mal­func­tions.

3

What to look for when buying?

When buy­ing a blender from Red­mond, you should pay atten­tion to:

  • com­plete box set;
  • per­for­mance (checked in the store);
  • avail­abil­i­ty of a war­ran­ty card;
  • attached sales receipt.

In the absence of a war­ran­ty card and receipt, the buy­er will be denied the return and repair of the pur­chased goods.

A war­ran­ty card (valid for 1 year) will allow you to repair or exchange a defec­tive prod­uct for free. The check will give the oppor­tu­ni­ty to return the goods with­in 2 weeks (in new con­di­tion), with­out expla­na­tion.

The war­ran­ty pro­vid­ed by the man­u­fac­tur­er is 12 months from the date of pur­chase. Dur­ing this peri­od, the man­u­fac­tur­er under­takes to elim­i­nate, by repair or replace­ment, any defects and mal­func­tions caused by insuf­fi­cient work­man­ship or mate­ri­als.

Vio­la­tion of the instruc­tion man­u­al will void the war­ran­ty. If it is not pos­si­ble to deter­mine the date of sale, the war­ran­ty is valid from the date of man­u­fac­ture, and can be up to 3 years (check in the instruc­tions attached to the device).

Repair of the device can only be car­ried out by spe­cial­ized ser­vice cen­ters with the nec­es­sary pro­fes­sion­al train­ing..

6


Опубликовано

в

от

Комментарии

Добавить комментарий