How to iron polyester

Poly­ester items require del­i­cate care and care­ful iron­ing, oth­er­wise there is a risk of spoil­ing them. Poly­ester is a mate­r­i­al that is resis­tant to wrin­kling and defor­ma­tion, which does not fade, is eas­i­ly and quick­ly erased, and is resis­tant to dirt. It retains the bright­ness and sat­u­ra­tion of col­ors for a long time. Such mate­r­i­al can be ironed, but sub­ject to cer­tain rules.

Key Recommendations

Poly­ester prod­ucts are char­ac­ter­ized by rigid fibers, so their shape is dif­fi­cult to change. In this regard, it is bet­ter to iron damp clothes. If she man­aged to dry com­plete­ly, then it will be dif­fi­cult to get rid of the bruise.

Suit­able wash­ing tem­per­a­ture for poly­ester is up to 40°C. At a high­er tem­per­a­ture, the fab­ric will quick­ly wrin­kle, many wrin­kles will appear on it.

In the last rinse, it is bet­ter to add an anti­sta­t­ic agent, which elim­i­nates the dust that often col­lects on the sur­face of the fab­ric. You can use 9% vine­gar by adding 2 tbsp. l. funds for 1 liter of water. After wash­ing, care­ful­ly wring out the fab­ric, with­out apply­ing force and with­out twist­ing the prod­uct. With machine spin, you must set the min­i­mum num­ber of rev­o­lu­tions.

If the fab­ric is thin, then it can only be washed by hand. Del­i­cate fab­rics should be dry-cleaned so that the experts care­ful­ly clean the prod­uct from dirt and dry it prop­er­ly.

Next, you need to hang the thing on a hang­er, straight­en­ing the folds, away from heaters and bat­ter­ies — so that the poly­ester fab­ric does not melt. From time to time, you should man­u­al­ly smooth the prod­uct. Per­haps iron­ing is not required.

Preparatory actions

Please read the label care­ful­ly before iron­ing poly­ester prod­ucts. Man­u­fac­tur­ers indi­cate whether a par­tic­u­lar prod­uct can be ironed, what is the max­i­mum allow­able tem­per­a­ture.

Also, you should first slight­ly soak the prod­uct in cold water and gen­tly wring it out. Wait until the water drains and the mate­r­i­al is dry.

How to iron polyester

1. If the gar­ment has a test piece of fab­ric, try iron­ing it on dif­fer­ent set­tings.

2. Most often, the tem­per­a­ture for iron­ing should be 60–80 ° C (Silk mode). Steam does not turn on when iron­ing.

3. If the clothes are made of cot­ton and poly­ester, then the per­mis­si­ble tem­per­a­ture is up to 110 ° C, while steam can be turned on.

4. The blend of poly­ester and fab­ric can be ironed up to 150°C.

More­over, if large creas­es have formed on the clothes, there are heav­i­ly crum­pled areas, then you can iron them with the max­i­mum tem­per­a­ture. The main thing is to pre-test the mode on a sep­a­rate piece of fab­ric or on an incon­spic­u­ous area of ​​the prod­uct. How­ev­er, the per­mis­si­ble tem­per­a­ture must not be exceed­ed, oth­er­wise there is a risk of dam­ag­ing the mate­r­i­al. It is bet­ter to iron the same area sev­er­al times with an iron at a mod­er­ate tem­per­a­ture.

How to iron polyester: procedure

To iron a poly­ester prod­uct, you must per­form the fol­low­ing steps:

1. Pre­pare gauze or cot­ton cloth, soak them in water. It is impos­si­ble to iron the prod­uct with­out gauze — oth­er­wise there is a risk of deform­ing and dam­ag­ing the mate­r­i­al.
2. Turn the item inside out. But if it was not pos­si­ble to iron the thing from the wrong side, you can walk on the prod­uct from the out­side — always with gauze or cloth. Do not apply too much pres­sure on the prod­uct.
3. Hang the ironed item on a coat hang­er and wait for it to dry. In 1–2 hours it will dry and take the desired shape.

The hang­ers must match the size of the clothes — oth­er­wise the prod­uct will be deformed. Do not keep poly­ester in direct sun­light and near heat­ing appli­ances. Do not remove cloth­ing until it is com­plete­ly dry. Most often, it com­plete­ly dries out in 1–2 days.

Features and nuances

1. Poly­ester jack­ets and oth­er out­er­wear should not be ironed.. If there are no strong folds and creas­es on it, then it is bet­ter to leave it with­out iron­ing — such clothes will smooth out on their own. But if you still need to iron it, then you need to start with the lin­ing. You can’t press hard. Be sure to use a moist­ened cot­ton tow­el or gauze.
2. A dress or skirt with pleats or pleats must be neat­ly ironed. Fas­ten the folds with small pins, con­nect the front and side seams, then iron the prod­uct.
3. As for poly­ester cur­tains, in most cas­es it is not nec­es­sary to iron them — it is enough to hang them on the ledge after wring­ing. At the same time, iron­ing gives them a flaw­less look. To do this, just set the “Silk” mode, turn the cur­tains inside out and iron through a damp cloth.

Most often, poly­ester is used in com­bi­na­tion with oth­er mate­ri­als. So, for sum­mer and fes­tive clothes, a mix­ture of poly­ester and lycra is used, for win­ter clothes — poly­ester with wool. A nylon/polyester blend is used for work jack­ets, while a cotton/polyester blend is used for over­alls. In this regard, it is nec­es­sary to study how your par­tic­u­lar mate­r­i­al from which the item is made reacts to iron­ing.

How to steam a polyester item

If there is a steam gen­er­a­tor, it will become eas­i­er to smooth the syn­thet­ic prod­uct. How­ev­er, 100% poly­ester can­not be steamed.

For steam­ing:

1. Hang the item on your hang­er.
2. Select the “Del­i­cate mode” func­tion on the steam gen­er­a­tor.
3. Place the device 4–5 cm from the mate­r­i­al, mov­ing from top to bot­tom.
4. Fin­ish the back of the prod­uct, and then move on to the shoul­ders and sleeves. At the end, go through the front of the prod­uct, process the col­lar.

Steam­ing allows you to smooth out even the most severe creas­es. Also, the pro­ce­dure restores col­or sat­u­ra­tion, elim­i­nates unpleas­ant odors and light pol­lu­tion.

In the absence of a steam gen­er­a­tor, you can use the “folk method” of steam­ing. Hang clothes on a coat hang­er over the tub and fas­ten all but­tons. Turn on the hot water faucet, close the door to the room tight­ly and leave for 15 min­utes. The creas­es will be ironed out, and after that you can move the thing on the coat hang­er to the room to dry it.

How to care for polyester products

Prop­er care of poly­ester will pre­serve the orig­i­nal appear­ance of the prod­uct and pre­vent the need for fre­quent iron­ing:

1. Do not wash poly­ester prod­ucts in hot water — oth­er­wise there is a risk of defor­ma­tion of the clothes.
2. Do not twist the clothes so that mul­ti­ple wrin­kles do not appear on it.
3. Do not add bleach when wash­ing: this agent spoils the fab­ric, makes it rough and rough.

If dirt has formed on the clothes, they must be com­plete­ly removed before iron­ing. Oth­er­wise, there is a risk of fix­ing the stain on the sur­face of the prod­uct — then it will not work to get rid of it. And when using elec­tric dry­ers, a low tem­per­a­ture should be turned on so that the fab­ric does not melt, and wrin­kles do not appear on its sur­face.

Thus, despite the resis­tance of poly­ester to high tem­per­a­tures, cer­tain rules and restric­tions must be observed when iron­ing — oth­er­wise there is a risk of spoil­ing the prod­uct. Take into account the infor­ma­tion from the man­u­fac­tur­er on the cloth­ing label and do not exceed the allow­able tem­per­a­ture range. In many cas­es, you can do with­out iron­ing the prod­uct — enough, for exam­ple, steam­ing.